Matsushita CF-T4GWCTZ1 2 Removing the LCD Knob and the Speaker, Removing the Main Board

2.2.6.Removing the LCD Knob and the Speaker

Preparation : perform the section 2.2.1. to 2.2.3. first.

1.Remove the latch spring from the top case.

2.Remove the hook of the LCD knob from stopper rib of the top case.

3.Peel off the tape of the speaker box.

4.Peel off the tape on the speaker and speaker ring and then remove the speaker.

Speaker Box

Speaker

2.2.8.Removing the Main Board

Preparation : perform the section 2.2.1. to 2.2.3. first.

1.Remove the 1 screw (E), 1 screw (F) and 2 screws (H). Screw (E):DXQT2+E10FNL(N10)

Screw (F):DXQT2+D4FNL(N9) Screw (H):DFHE5035ZB(N2) Screw (I):KIYE50000022(N500)

Speaker Ring

Screw(E) Screw(F)

Screw(H)

Screw(I)

Latch

Spring

LCD Knob

Location of the Spring

2.2.7.Removing the USB Board

Preparation : perform the section 2.2.1. to 2.2.3. first.

1.Peel off the tape for clamp the USB cable.

2.Remove the connector (CN23) on the main board.

3.Remove the USB board from the bottom case.

CN23 Tape

2.Remove the 2 screws (N). Screw (N):DXQT2+E6FNL(N13)

3.Remove the modem cable from the MDC modem.

4.Remove the side cover(L) from the bottom case.

Side Cover(L)

	Antenna Board(L)
DC Jack	Screw(N)
Holder	Screw(N)

Modem Cable

Tape

Main Board

LAN Cable

USB Cable

2-Port USB Board

2-5