Matsushita CF-T4GWCTZ1 2 Removing the Antenna Board L,R and the DC-IN Cable, Dc-In, Lan

5.Remove the DC jack holder on the DC-IN jack.

6.Remove the LCD cable connectors (CN10,CN11,CN24).

LCD Cable

CN24

CN10

CN11

2.2.9.Removing the Antenna Board (L,R) and the DC-IN Cable

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.8. first.

1.Remove the antenna cable(L) from the main terminal and the antenna cable(R) from the AUX terminal and then remove the antenna board(L, R) from the bottom case.

2.Remove the DC-IN cable(CN600) from the main board.

Antenna Board(L) Antenna Cable(L)

DC-IN

Cable

CN600

7.Turn it to arrow and remove the lithium battery connector (CN3), LAN cable connector (CN16) and HDD FPC connector (CN4) and then remove the main board.

Power Knob

LAN SW Knob

Tape

CN600

LAN

Cable

Lithium Battery CN3

Cable

CN16 DC-IN Cable

Antenna Cable(R)

Antenna Board(R)

2.2.10.Removing the Wireless LAN Module

Preparation : perform the section 2.2.1. to 2.2.3. and 2.2.8. first.

1.Peel off the tape on the wireless LAN module.

2.Open the wireless LAN module holding arms and remove the wireless LAN module.

Tape

Wireless LAN Module

Main Board

2-6