Ultra ATA | Maxtor ATA |
Interface Cable | Hard Drive |
MaxBlast ® |
|
MaxBlast® CD | Mounting Screws |
This Installation
Guide
Figure 1
Included in this Kit
Getting Started
Thank you for selecting a Maxtor hard drive storage product. This installation guide will lead you through the installation of your hard drive.
The Maxtor Hard Drive Kit includes the components shown in Figure 1. Your computer may need some or all of these parts to complete the installation. You will also need the tools shown in Figure 2 on page 2 including a full version of your operating system to install the hard drive in your computer.
Handling the Hard Drive
Your hard drive should be handled with care during unpacking and installation. Damage to hard drives is typically caused by rough handling, shock, vibration, or electrostatic discharge (ESD). Be aware of the following precautions when unpacking and handling your hard drive:
•Save the packing materials in case you need to return your hard drive.
•Allow the hard drive to reach room temperature before opening the
•Handle the hard drive by its sides. Do not touch the circuit board electronics on the bottom of the hard drive.
•Do not connect or disconnect any hard drive cables when the system is powered on.
•Do not drop, jar, or bump the hard drive.
1
Getting Started | 1 |
