After the Self-Clean Cycle
Ahout one hour after the clean cvcle is complete, the word "LOCK" will turn off in the'display and the door lever can be returned to its original position. The oven _411still he hot.
Some soft m W leave a light grav, powde U ash which can be removed with a damp cloth. If soil remains, it indicates that the clean cycle was not long enough or a large spilhwer was not wiped tip before the sell'clean
cycle. The soil should be removed during tile next clean cycle,
If the oven racks were left in the oven during the self- clean cycle and do not slide Slnoothly, wipe the rack
edges and rack supports with a small amount of vegetable oil to restore the ease of movement.
Fine hairlike lines may appear in the oven interior or oven door. This is a normal condition resulting from the heating and cooling of the porcelain finish. These lines do not a/}bct the performance of the oven.
For more information on cleaning your Maytag wall oven, refer to the cleaning chart below.
Wall Oven Cleaning Chart
Cleaning Agents*
Many different eleaning agents are recommended for the various parts of the wall oven. Read product labels for
specific recommendations. | The following brand names may help you to inake an appropriate selection: |
1.Mild ahrasive cleaners such as Bon Ami, Sot} Scrub, Smart Scrub, Baking Soda.
2.Mild liquid sprays such as Fantastik and Formlila 4(19.
3.Glass cleaners such as Windex and Glass Phis.
4.
DO NOT USE abrasive cleansing powders such as Conlet,
Be certain all wall oven parts are cool before removing any part or cleaning the unit to avoid damage. Any parts that are removed for cleaning should be replaced
q_ralld nanlles of clemfing agents are tradt'nlarks ill" the respective n3anut_tcturcrs
Soap and water | Soaking makes cleaning easier. |
Plastic or soap£illed |
|
scouring pad |
|
Dishwasher |
|
Soap and water
Glass Cleaners
Soap and water
Soap aud water
Mild liquid sprays
Soap and water Plastic scouring pads Cleansing powders
Wipe with paper towels dampened with soapy water or glass cleaner. Do not spray any cleaning solutions directly onto the display window Mruse large amounts of soap and water. Do NOT scrub with
Av0id using excessive amp_mtsof water Wh eh may see p _nder or behilld gi_
Do not use ()Veilcleaner Mrabrasive agents. Polish with a soft cloth.
If racks are left in oven during a
CImtinued on next page
PAGE 11