Maytag CWE9030B Setting the Clock and Timer Clock, Oven Temp Pad, Timer Pad, •and • Pads

Models: CWE9030D CWE9030B

1 21
Download 21 pages 51.65 Kb
Page 6
Image 6
Oven Temp Pad

Oven Temp Pad

Press this pad to select regular baking and roasting. Set

the oven temperature by pressing the • or • pads. Additional information can be found on pages 6-7.

Timer Pad

The timer can be set from 1 minute to 9 hours, 50 minutes. It will count down by seconds (when set for 1 minute) or minutes (when set for 2 minutes or more time). See below fbr instructions on setting the timer,

and Pads

Press or press and hold these pads to enter the time or temperature desired. These pads are also used to select Hi or [1obroil.

Setting the Clock and Timer

Clock

To set the time-of-day clock:

1.Press the CLOCK pad once. The words "SET TIME" will flash in the display,

2.Set the correct time of day using the • and • pads.

To change the time by one minute, press either pad once.

To change the time in increments of 10 minutes, press and hold either pad.

When the power is first supplied to the wall oven or if there has been a power failure, the display" will flash. Follow above instructions to set the clock. The clock

time cannot be changed when the oven is set for a cook

or self-clean operation. Cancel the operation to set the clock.

Press the CLOCK pad to recall the time of day when another function is displayed.

Timer

To set the timer:

1.Press the TIMER pad once. The words "SET TIMER" will flash in the display.

2.Set the desired time using the • and • pads.

Press either pad once to change the time by 1 minute (if the Timer is set for up to 1 hour), 5 minutes (if the Timer is set for over 1 hour), or 10 minutes (if the Timer is set for over 2 hours).

Press and hold either pad to change the time in ,5 minute or 10 minute increments, depending

upon the time set in the display.

The TIMER can be set from 1 minute (0HR:01) up to 9 hours and 50 minutes (9 HR:50).

The timing operation will start automatieally. Colons will flash in the display to indicate a timing operation. One long continuous beep will signal the end of the timing operation and "End" will briefly appear in the

display. The time of day will automatically reappear in

the display. The TIMER pad does not control the oven.

To eaneeh Press the TIMER pad and hold for 3 seconds. The time of day will reappear after a slight delay.

PAGE 5

Page 6
Image 6
Maytag CWE9030B Setting the Clock and Timer Clock, Oven Temp Pad, Timer Pad, •and • Pads, To set the time-of-dayclock