Maytag MFS 25-35 manual Freely On The Floor, Freely On An Elevation

4.3.1. FREELY ON THE FLOOR

The machine is to be located on a not elevated leveled concrete floor that comply with static and dynamic stress of the machine.

The friction coefficient must be higher then 0,5 between the rubber feet and the floor material. Do not place the machine on a smooth surface but on a rough floor material like concrete. If the friction coefficient is less, then the machine can move while spinning. If this should happens fasten the machine, see „Fasten with anchoring bolts“.

MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb

Position the machine only on his 4 adjustable rubber feet.

MACHINES 16kg / 36lb

Place between the four corners of the frame and the floor a thin rubber sheet of 10x10cm / 3.93“x3.93“ with thickness between 1-2 / 0.04“-0.08“ maximum. We advice to fasten this machines always, see „Fasten with anchoring bolts“.

4.3.2. FREELY ON AN ELEVATION

MACHINES 6kg / 13lb, 7kg / 16lb, 10kg / 22lb

If you choose to place the machine on a metal base or pad, use a U-profile to secure the machine position. Fix the U-profile to the iron frame by welding or fix it to the floor by anchoring bolts. This is necessary to prevent that the machine moves from the base. Make a base according, fig. 4.3.2.

Place the machines front rubber feet in the U-profile.

Fig. 4.3.2. Design of metal base

	6kg / 13lb	7kg / 16lb
Distance A	660	660
Distance B	480	480
Distance C	590	590

10kg / 22lb

760

480

590

Tab 4.3.2. Frame dimensions

!WARNING ! NEVER DO THIS FOR A 16 kg / 36 lb MACHINE.

8 INSTALLATION AND MAINTENANCE MANUAL PUBLICATION DATE Sep 05 100646