Maytag MGR6751BDW manual During the Self-CleanCycle, After Self-Cleaning, Self-CleanNotes, Sounds

Models: MGR6751BDW

1 76
Download 76 pages 44.34 Kb
Page 17
Image 17
 Care & Cleaning

When the Self-Clean cycle starts: Care & Cleaning

3. Press the apropriate Clean pad while “dLY” is flashing.

• “Clean” and “Set” will flash.

If the door is not closed within 25 seconds, the self- cleaning operation will be canceled and the display will return to the time of day.

4. Press the More+ or Less- pad.

“MEd” for medium amount of soil (3 hours) is displayed.

If the door is not closed, “door” will appear in the display. After 45 seconds, three beeps will

sound, the self-cleaning operation will be canceled and the display will return to the time of day.

5.Press the More+ pad twice for heavy soil (4 hours). “HVy” will be displayed.

Press the Less- pad twice for light soil (2 hours). “LITE” will be displayed.

Choosing the soil level of the oven automatically programs the self-cleaning time.

6.After four seconds, “Clean”, “dLY” and “Lock” will appear in the display to show that the oven is set for a delayed clean operation. The delay time is displayed and will begin to count down.

When the Self-Clean cycle starts:

“dLY” will turn off.

“Clean”, “Hours”, “Lock” and the clean time will appear in the display.

To cancel the Self-Clean cycle:

Press the CANCEL pad.

All words disappear from the display.

All functions are canceled.

The time of day appears in the display.

During the Self-Clean Cycle

When “Lock” shows in the display, both oven doors are locked. To prevent damage to the doors, do not force the doors open when “Lock” is displayed.

Smoke and Smells

You may see some smoke and smell an odor the first few times the oven is cleaned. This is normal and will lessen in time.

Smoke may also occur if the oven is heavily soiled or if a broiler pan was left in the oven.

Sounds

As the oven heats, you may hear sounds of metal parts expanding and contracting. This is normal and will not damage the oven.

After Self-Cleaning

About one hour after the end of the self-clean cycle, “Lock” will turn off. The doors can then be opened.

Some soil may leave a light gray, powdery ash. Remove it with a damp cloth. If soil remains after wiping, that means the clean cycle was not long enough. The soil will be re- moved during the next clean cycle.

If oven racks were left in the oven and do not slide smoothly after a clean cycle, wipe racks and rack supports with a small amount of vegetable oil to make them easier to move.

Fine lines may appear in the porcelain because it went through heating and cooling. This is normal and will not affect performance.

A white discoloration may appear after cleaning if acidic or sugary foods were not wiped up before the self-clean cycle. This discoloration is normal and will not affect perfor- mance.

Self-Clean Notes:

If the oven door is left open, “door” will appear in the display until the door is closed.

If more than five seconds elapse between pressing the Clean pad and the More+ or Less- pad, the program will automatically return to the previous display.

The oven door will be damaged if the oven door is forced to open when “Lock” is still displayed.

16

Page 17
Image 17
Maytag MGR6751BDW manual During the Self-CleanCycle, After Self-Cleaning, Self-CleanNotes, When the Self-Cleancycle starts