Care & Cleaning (continued)
Cleaning CAUTIONS:
•Be sure appliance is off and all parts are cool before handling or cleaning. This is to avoid damage and possible burns.
•To prevent staining or discoloration, clean appliance after each use.
•If a part is removed, be sure it is correctly replaced.
Cleaning Chart
Parts | Cleaning Procedure |
Broiler Pan
and Insert
Brushed Chrome (select models)
Burner Caps
and Sealed Gas
Burners
Burner Grates (porcelain on cast iron)
Clock and Control Pad Area
Control Knobs
Cooktop, Control Panel (porcelain enamel)
Never cover insert with aluminum foil as this prevents the fat from draining to the pan below.
•Place soapy cloth over insert and pan; let soak to loosen soil.
•Wash in warm soapy water. Use soap filled scouring pad to remove stubborn soil.
•Broiler pan and insert can be cleaned in dishwasher.
•When cool, wash with soapy water, rinse and buff the surface.
•For heavier soil, use a mild abrasive cleaner such as baking soda or Bon Ami*, rubbing with the grain to avoid streaking the surface. Rinse and buff.
•To prevent scratching, do not use abrasive cleaners.
•To restore luster and remove streaks, follow with Stainless Steel Magic Spray* (Part #20000008)**.
Chrome will permanently discolor if soil is allowed to bake on.
•Allow burner to cool. Remove burner cap and wash in soapy water with a plastic scouring pad or in the dishwasher. For stubborn soils, clean with a
•For burned on soil, place burner cap on newspapers and spray with commercial oven cleaner. Follow manufacturer’s directions.
•Clean gas ports with a straight pin especially the port below the ignitor. Do not enlarge or distort holes.
•Be careful not to get water into burner ports.
•When cleaning, use care to prevent damage to the ignitor. If the ignitor is soiled, wet or damaged the surface burner will not light.
•Wash grates with warm, soapy water and a nonabrasive, plastic scrubbing pad.
For stubborn soils, clean with a
•For burned on soils, remove grates, place on newspapers and carefully spray with commercial oven cleaner. (Do not spray surrounding surfaces.) Place in plastic bags for several hours or overnight. Wearing rubber gloves, remove from bags. Wash, rinse, dry and replace on cooktop.
•To activate “Control Lock” for cleaning, see page 6.
•Wipe with a damp cloth and dry.
•Glass cleaners may be used if sprayed on a cloth first. DO NOT spray directly on control pad and display area.
•Remove knobs in the OFF position by pulling forward.
•Wash, rinse and dry. Do not use abrasive cleaning agents as they may scratch the finish.
•Turn on each element to be sure the knobs have been correctly replaced.
Porcelain enamel is glass fused on metal and may crack or chip with misuse. It is acid resistant, not acid proof. All spillovers, especially acid or sugar spillovers, should be wiped up immediately with a dry cloth.
•When cool, wash with soapy water, rinse and dry.
•Never wipe off a warm or hot surface with a damp cloth. This may cause cracking or chipping.
•Never use oven cleaners, abrasive or caustic cleaning agents on exterior finish of range.
19
