Maytag T2 warranty Controls at a Glance, Function Pads, BAKE Pad, Numbers, CANCEL Pad, BROIL Pad

Controls at a Glance

The control panel is designed for ease in programming. The display window on the electronic control shows time of day, timer and oven functions. Indicator words flash to prompt your programming steps.

CONVECT BAKE		00:00		0 0 0 °		0	1	2	3	4
						PRESET
				LOCK	BAKE
			HR
		DELAY COOK STOP TIMER CLEAN ROAST BROIL				5	6	7	8	9
BAKE	BROIL	CLEAN	COOK	STOP	CONTROL	TIMER				CLOCK
			TIME	TIME	LOCK			CANCEL

3

NOTE: Styling and features may differ slightly depending on the model. Control panel shown above includes Convect

Bake feature.

Function Pads

•Press the desired pad.

•Press the Preset (0) pad or the appropriate number pads to enter time or temperature.

•A beep will sound when any pad is touched.

•A double beep will sound if a programming error occurs.

NOTE: Four seconds after entering the number, the time or temperature will automatically be entered. If more than 30 seconds elapse between touching a function pad and the number pads, the function will be canceled and the display will return to the previous display.

BAKE Pad

Use for conventional baking or roasting.

1.Press BAKE pad.

2.Press PRESET (0) pad for 350°F. Each additional press of the Preset (0) pad will raise the temperature 25°. Or, press the appropriate number pads for desired tempera- ture.

See page 11 for additional information.

Numbers

Use to set time or temperature.

CANCEL Pad

Use to cancel all programming except Clock and Timer functions.

BROIL Pad

Use for top browning and broiling.

1.Press BROIL pad.

2.Press PRESET (0) pad for HI broil, press again for LO broil, or press the appropriate number pads to set de- sired broil temperature.

See page 15 for additional information.

CONVECT BAKE Pad (select models) CLEAN Pad

Use for convection baking or roasting.

1.Press CONVECT BAKE pad.

2.Press PRESET (0) pad for 325°F. Each additional press of the Preset (0) pad will raise the temperature 25°. Or, press the appropriate number pads for desired tempera- ture.

See page 11 for additional information.

Use to set self-clean cycle.

1.Press CLEAN pad.

2.Press PRESET (0) pad for “3:00” hours of cleaning time.

3.If more or less cleaning is desired, press the appropriate number pads. Cleaning time may be set between 2 and 4 hours.

See pages 17-18 for additional information.

5