Maytag W10345638A manual Ceramic Glass, Bridge Element

Bridge Element

Use the bridge area to create an oblong heated area to cook with large cookware.

	C	C	C
	B	B
A	A	A	A

A. Left front single element

B. Left center bridge element

C. Left rear single element

Left front control Left rear control

To use SINGLE (A):

1.Push in and turn left front control knob counterclockwise from the Off position to the SINGLE zone anywhere between LOW and HIGH.

2.Turn control knob to Off when finished.

To use SINGLE (C):

1.Push in and turn left rear control knob clockwise from the Off position to anywhere between LOW and HIGH.

2.Turn control knob to Off when finished.

To use SINGLE and BRIDGE area (A+B):

1.Push in and turn left front control knob clockwise from the Off position to the BRIDGE zone anywhere between LOW and HIGH.

2.Turn control knob to Off when finished.

To use both SINGLE elements and BRIDGE (A+B+C):

1.Push in and turn left front control knob clockwise from the Off position to the BRIDGE zone anywhere between LOW and HIGH.

2.Push in and turn left rear control knob clockwise from the Off position to anywhere between LOW and HIGH.

3.Turn both control knobs to Off when finished.

To use both SINGLE elements (A+C):

1.Push in and turn left front control knob counterclockwise from the Off position to the SINGLE zone anywhere between LOW and HIGH.

2.Push in and turn left rear control knob counterclockwise from the Off position to anywhere between LOW and HIGH.

3.Turn control knobs to Off when finished.

Ceramic Glass

(on some models)

The surface cooking area will glow red when an element is on. Some parts of the surface cooking area may not glow red when an element is on. This is normal operation. It may cycle on and off to maintain the selected heat level.

It is normal for the surface of light colored ceramic glass to appear to change color when surface cooking areas are hot. As the glass cools, it will return to its original color.

Cleaning off the cooktop before and after each use will help keep it free from stains and provide the most even heating. On cooktops with light colored ceramic glass, soils and stains may be more visible, and may require more cleaning and attention. Cooktop cleaner and a cooktop scraper are recommended. For more information, see “General Cleaning” section.

■Avoid storing jars or cans above the cooktop. Dropping a heavy or hard object onto the cooktop could crack the cooktop.

■To avoid damage to the cooktop, do not leave a hot lid on the cooktop. As the cooktop cools, air can become trapped between the lid and the cooktop, and the ceramic glass could break when the lid is removed.

■For foods containing sugar in any form, clean up all spills and soils as soon as possible. Allow the cooktop to cool down slightly. Then, while wearing oven mitts, remove the spills using a scraper while the surface is still warm. If sugary spills are allowed to cool down, they can adhere to the cooktop and can cause pitting and permanent marks.

■To avoid scratches, do not slide cookware or bakeware across the cooktop. Aluminum or copper bottoms and rough finishes on cookware or bakeware could leave scratches or marks on the cooktop.

■Do not cook popcorn in prepackaged aluminum containers on the cooktop. They could leave aluminum marks that cannot be removed completely.

■To avoid damage to the cooktop, do not allow objects that could melt, such as plastic or aluminum foil, to touch any part of the entire cooktop.

■To avoid damage to the cooktop, do not use the cooktop as a cutting board.

■Use cookware about the same size as the surface cooking area. Cookware should not extend more than ½" (1.3 cm) outside the area.

B

A

C

A. Surface cooking area

B.Cookware/canner

C.½" (1.3 cm) maximum overhang

■Use flat-bottomed cookware for best heat conduction and energy efficiency. Cookware with rounded, warped, ribbed or dented bottoms could cause uneven heating and poor cooking results.

7