Memorex MLT1522 manual Connection Using VGA to Component Cable

DVD CONNECTIONS (CONTINUED)

CONNECTION USING S-VIDEO CABLE:

Follow the instructions below to connect a DVD player to your television using the S-Video cable. (CABLES NOT INCLUDED.)

1.	Connect the left and right audio cable from
	the DVD’s Audio OUT jacks to the TV’s
2.	audio left and right AUDIO IN jacks.
	Connect the DVD’s S-VIDEO OUT jack to
3.	the TV’s S-VIDEO IN jack.
	Press the TV/VIDEO button until S-Video
	appears on the TV screen and press PLAY
	on the DVD to watch the DVD.
Audio cords

CONNECTION USING “VGA TO COMPONENT” CABLE:

Follow the instructions below to connect a DVD player to your television using "VGA to COMPONENT” Cable (CABLES NOT INCLUDED.)

		1. Connect the left and right audio cable from
			the DVD's Audio OUT jacks to the TV's
			audio left and right AUDIO IN jacks.
		2. Connect the "VGA to Component” cable
	From Component		(not included) from the DVD's Y,Cr,Cb OUT
	VIDEO OUT jacks	3.	jacks to the TV's VGA IN jack as shown.
			Press the TV/VIDEO button until CVI
	VGA to		appears on the TV screen and press PLAY
From AUDIO OUT jacks			on the DVD player to watch a DVD.
	Component Cable	NOTE: Connecting the DVD player to the TV
Audio cords		using the “VGA to Component” cable will
		provide the highest quality picture. Connecting
		using an S-Video cable will provide the next
		highest quality picture, followed by standard
To AUDIO IN jacks	To VGA IN Jack	Audio/Video cable connection.
	12