Memorex MLT1522 manual Adding and Skipping Channels

ADDING AND SKIPPING CHANNELS

After setting channels into memory, you can add or delete channels as follows:

Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select the TV mode. Select a channel to erase or add using the Direct Channel Selection/Number (0-9) buttons 3.

Main Menu

Main Disp

Image Setup

Audio Setup

PC Setup

TV Setup

Language

Recall

Quit

Press the MENU button 1; the Main Menu screen will appear. Press the CHANNEL/Navigation UP 2 or DOWN 3 button to select TV SETUP, then press the ENTER button 4 to select it.

TV Setup

AIR CATV

Auto Program

Add Erase CH

Close Caption

VChip Control

System Setup

Return

Press the CHANNEL/Navigation UP 1 or DOWN 2 button until ADD ERASE CH is selected, then press the ENTER button 5 to select it. Select ADD, ERASE or EXIT using the VOLUME UP/Navigation Right 3 or VOLUME DOWN/Navigation Left 4 button. Press the ENTER button 5 to confirm and exit the menu. If ERASE is selected, the channel will be skipped when using the CHANNEL/ Navigation UP 1 or DOWN 2 button to select a TV channel while in TV mode.

If you select EXIT, it will return to the TV Setup menu.

NOTE: If a channel is erased, you cannot use the Channel/Navigation UP or Down button to select that channel. You can only use the Direct Channel Selection/Number (0-9) buttons to select that channel. Add the channel again so you can select that channel using the Channel/Navigation UP or Down button.

20