The Smart Remote Control User’s Manual
The filled button corresponds to the direct access power 
button. With the Learning eye, you can now map buttons on your device remote control to the direct access buttons on the Smart Remote Control. Follow these instruc- tions:
1.Point your remote control at the Smart Remote Control’s Learning eye as shown in Figure 4
2.Press your remote control power button. When the screen dis- plays OK, release the power button. Refer to the following illustration:
OK
3. The filled circle now corresponds to the channel up/play CH+ di- rect access button.
4.Follow the preceding instructions to map the remaining buttons.
You can also press a direct access button directly, and then map a remote con- trol function to the button.
After you have finished configuring the direct access buttons, press the right arrow button on the LCD screen to move to the next page in the device menu. Follow the instructions above to map each button on your remote control to the corresponding button on the Smart Remote Control’s LCD screen.
Clearing a key
26 | Faroudja |
