Macro setup

The Smart Remote Control User’s Manual

Follow these instructions to set up a macro:

1.From the macro menu, scroll to setup and press enter. The macro is now being recorded.

2.Press the device button combination that you want to be recorded into the macro.

If necessary, you can set a time delay between each command in

the macro. In the upper right-hand corner of the screen, you see an hourglass icon 6. After pressing a command, press the hourglass

icon to open the following screen:

Macro

0.51

1015

Sec Sec

Press one of the listed durations (0.5 seconds to 15 seconds) if you want to have a time delay occur between device commands.

3.When you have finished recording the macro press enter. You see the following screen:

Faroudja