MGE UPS Systems 3000 VA, 2000 Securing and connecting the connection modules, Two screws

2.Installation

2.5Securing and connecting the connection modules

Securing the connection modules

1. Insert the connection module in the connector 10 .

10	2. Secure the connection module to the UPS using
	the two screws 31 .
31
31

Fault tolerant

Before carrying out any connections, check that the battery circuit breaker 8 is OFF and that the electrical power cord to the AC-power source is disconnected.

Connection of equipment:

Connect the protected equipment directly to the outlets 2 .

2

1Connection to the AC-power source:

29	1. Connect the electrical power cord 29 to the socket 1
	for connection to AC-power source.

2. Connect the other end of the electrical power cord to an AC-power outlet.

Page 16 - 51033211EN/AC