Environment, Packing | MGE UPS Systems 3000 VA, 2000 manual

5. Environment

This product has been designed to respect the environment:

It does not contain CFCs or HCFCs.

It was manufactured in a factory certified ISO 14001.

UPS recycling at the end of service life:

MGE UPS SYSTEMS undertakes to recycle, by certified companies and in compliance with all applicable regulations, all UPS products recovered at the end of their service life (contact your branch office).

Packing:

UPS packing materials must be recycled in compliance with all applicable regulations.

Warning:

This product contains lead-acid batteries. Lead is a dangerous substance for the environment if it is not correctly recycled by specialized companies.

Web site : www.mgeups.com

Page 30 - 51033211EN/AC

Image 30

MGE UPS Systems 3000 VA, 2000 user manual Environment, This product has been designed to respect the environment, Packing

Contents

Pulsar EXtreme Introduction Using this document ForewordPictograms Contents Failure of AC input power and operation on battery power Glossary Index Tower model PresentationPulsar EXtreme range Rack model Connection modules Fault tolerantHot swap Install Output terminal block with cable clamp Back Battery extensions for UPS backup times of 66 minutes Options CLA Alarms Battery Load Remaining Control panel Installation CD ROM with Solution Pac and UPS Driver softwaresUnpacking and checks Rack model Installation of the rack version Rack mounting diagram with rails Installation of the communications-card option Connection to the RS 232 communications port optional Securing the connection modules Securing and connecting the connection modulesConnection to the AC-power source Two screws Always connect the earthing wire first Hot swapConnection of equipment to a terminal block Power and equipment connections ON-LINE operating mode Operation Start-up Bargraph indications Failure of AC input power and operation on battery power Function Personalizable function Default settingPersonalization On / OFF conditions tab Output tab Battery tabPersonalizable function Default setting Options By-pass tab Connected equipment is no longer supplied with power Shutdown Maintenance Troubleshooting 26 51033211EN/AC UPS replacement Fault-tolerant connection moduleConnected equipment is again protected by the UPS Hot-swap and Install connection modules Press button 24 and wait 20 seconds Check that LED 21 is on This product has been designed to respect the environment UPS recycling at the end of service lifeEnvironment Packing Appendices Glossary Sleep mode InstallON-LINE mode Start on battery power Battery Index 34 51033211EN/AC