MGE UPS Systems EX 11RT, EX 7RT, EX 5RT Accessing personalization through external software

EX 5/7/11 RT System

Table 3-3: ON/OFF features.

	Display	Factory setting	Options	Comments
	Cold start	Disabled	Enabled	Start on battery.
	Forced reboot	Enabled	Disabled	Enables automatic restart of
				the system even if normal AC
				source is restored before the
				end of the shutdown sequence.
	Automatic restart	Enabled	Disabled	UPS restarts automatically
				when normal AC source
				is restored.
	Sleep mode	Disabled	Enabled	Automatic shutdown on battery
				if output load level <10%
	Remote Command	Enabled	Disabled	Enables shutdown or restart
				orders from software.
Table 3-4: Battery features.
	Display	Factory setting	Options	Comments
	Battery test	Every week	No test/daily/monthly
	Pre-Alarm	20%	0 to 100%	Low battery signal;1% increment
	Runtime choice	UPS reads # and type	From 65 to 400 Ah	Requires EX 5/7/11RT CLA if
		of battery		using options (see section 1.5.4
		modules connected.		“Battery extensions cable kit”)
	Battery deep discharge	Enabled	Disabled	If disabled, loss of
	protection			MGE UPS SYSTEMS,INC.
				warranty.

3.2.2Accessing personalization through external software

Insert the Solution-PacCD ROM in your CD drive.

◗At the first Navigator Screen, select "Installation" and follow the instructions to install Personal Solution-Pacfor Windows.

◗If nothing appears, launch startup.exe

◗Then go to "Advanced settings" and "UPS settings".

Please note that the Linux/Unix/MacOS versions of Personal Solution-Pacdo not include this feature.

3.2.3Final startup sequence

Press the <ON> button more than 3 seconds.

◗After UPS internal test sequence, the green LED 15 goes on.

CAUTION	During the restart, if the Bypass AC source is out of
	tolerance, the UPS will generate an output
	calibrated 10 msec output interrupt.

3 — 4 Operation 86-86000-00 A01