Installation and User Manual
2.4Installation in Rack Mounting Configuration
2.4.1Adjustment of Front Panel Logo and control panel for Rack Orientation.
NOTE | If system includes the transformer module, we recommend to mount the battery module |
| on the bottom, then mount the power module above the battery module and mount the |
| transformer on top for optimum stability. |
|
|
To prepare the front panel logo and LCD display for rack orientation, of all modules. (including transformer or CLA module, if equipped).
Proceed as follows:
1.Unclip logo plate, and pull the LCD display from front panel.
2.Rotate them 90 degree counter clockwise as shown.
3.Place items back onto the panel.
Figure 2-3: Typical orientation of the logo and control panel. (Power Module shown)
www.mgeups.com
OFFON
E X | 1 1 | R T |
EX 11 TR ON OFF
1
www.mgeups.com
2
3
| O | EX |
| FF | 1 |
|
| 1 |
|
| RT |
| NO |
|
E X | 1 1 | R T |
|
| ON |
OFF |
|
|
FINISHED PANEL (rack orientation)
1
2
3
Installation | 2 — 5 |