• The Multifeed is detected. (DS32006)
Cause: | The papers are scanned with multifeeding. (One paper stuck to |
| another) |
Resolution: | Remove the papers stopped by multifeeding, and reset them. |
• Insufficient memory. (DS41001)
Cause:
Resolution:
There is not enough memory for tasks such as scanning and image processing. The driver program consumes a lot of memory space for caching (when Ram cache or /Use Both Memory is selected) or for processing images. Because of this, insufficient memory is likely to have occurred.
・Lower the resolution.
・Don’t use the following image processing settings: Dropout Color=”None” and Image Rotation.
・Lower the Automatic Page Size Detection Priority.
・Don't compress the file when saving it.
・Select a caching mode other than “Ram cache” or “Use Both Memory.”
・Increase virtual memory.
• An error occurred in the temporary file. (DS41006)
Cause: | Accessing the internal temporary file of the scanned image is causing |
| the error. The disk space may be insufficient, the temporary file may |
| be damaged, or other programs may be affecting disk access. |
Resolution: | Increase the free space of the disk. Check the hard disk (chkdsk and |
| scandsk). Make sure that no other program is accessing the disk. If the |
| error message persists, contact the retail store where the product was |
| purchased or the nearest service center. |
• Download file not found. (DS00016) | |
Cause: | A file specified as a dither pattern or gamma pattern cannot be found. |
Resolution: | Check that the download file is in the specified directory. Otherwise, |
| use the file selection dialog to specify an available file. |
• Illegal format or data in download file. (DS41009)
Cause: | The format of the specified download file is illegal or the data is |
| incorrect. |
Resolution: | Use an editor to check file format and data. |
120