The output order of the back side images scanned in Duplex mode.
When "Book" is selected under [Flip Side Rotation]
Third page | : | The upper half on the back side |
Fourth page | : | The lower half on the back side |
When "Fanfold" is selected under [Flip Side Rotation]
Third page | : | The lower half on the back side |
Fourth page | : | The upper half on the back side |
*Split image is not supported in all scanner models. See “Relevant Image Scanner Specification” in the Appendix.
*The [Blank page skip] function is valid for each split (upper and lower) half.
When either of the upper and lower halves is blank, only the blank half (one page) is skipped.
*When [Digital Endorse] is enabled, a character string is printed on each separate page.
*When this function is enabled, [Multi Image] or [Color/ monochrome Auto Detection] cannot be enabled, and vice versa.
*This function is disabled when you select
♦Overscan
This function makes the scanned images larger than the original documents by adding margins. This option is available only when [Black Background] or [White Background] is selected for [Automatic Size and Skew detection].
This option may not be supported for some scanners. See "Relevant Image Scanner Specification" in the Appendix.
♦Cutting out Size
Depending on the size of the document, crops the image from all sides based on the cropping width specified.
This can be set only when [Automatic Page Size Detection] is selected in [Automatic Size and Skew Detection].
*If the document is cropped a little larger than its actual size, there will be black margins on the outer edge of the image.
*If the document is cropped smaller than its actual size, the area around the edges of the document will be deleted.
*If the specified setting surpasses the largest scanning size, this largest size will be used.
41