*The image orientation may not be corrected properly depending on the driver setting at scanning.

*If you cannot correct the image orientation properly, use the Edge Emphasis function of the driver to correct it.

*This function does not work properly for some applications.

♦Punch hole removal

Holes punched along the binding side are detected and filled with white or background color. This setting can be specified only when the [Automatic Page Size Detection] or [Black Background] setting is selected in the [Automatic Size and Skew detection] drop- down list.

Depending on the documents, characters and/or graphics may be mistakenly detected as punch holes and filled with a color. If this happens, select [Automatic Page Size Detection] and specify "3" for [Priority] to avoid false detection.

Do not remove

Punch holes are ignored.

Fill with white

Punch holes are white out (filled with white).

Background color

Punch holes are filled with a color used around the punch holes. (If more than one color is used, holes are filled with the most used color.)

*When scanning a color document, select [Background color].

If you select [Fill with white], punch holes will be filled with white. *This function may not work properly when:

-Punched holes are not aligned along the document edge.

-Holes are punched in varying sizes or at irregular intervals.

-The document is not rectangular.

-The background of the document is dark.

-There are characters and/or pictures at the document edges or the punched holes.

-With [Automatic Page Size detection] being selected, the scanned document size is larger than the one selected in the [Paper Size] drop-down list.

-With [Black Background] being selected, the scanned document size is different from the one selected in the [Paper Size] drop-down list.

-With [Halftone (Dither)] or [SEE (Selective Edge Emphasis)] being selected in the [Image Mode] drop-down list.

38