| Problem solving guide | |
|
| |
|
| |
Problem | Possible cause and remedy | |
|
| |
Drink dispensing | Condensate may have built up on the control panel and | |
starts even though | accidentally started the process. | |
a sensor has not | Wipe any condensate off with a soft cloth. | |
been touched. | ||
| ||
|
| |
Milk is dripping or | The level of milk in the milk flask is higher than the central | |
running out of the | spout. | |
central spout even | Push the central spout up as far as it will go. | |
though no milk is |
| |
being dispensed. |
| |
|
| |
The descaling | The descaling programme cannot be stopped once the OK | |
programme was | sensor has been touched. | |
started by | Descaling must be continued through to completion. This is | |
mistake. | a safety precaution to make sure the machine is descaled | |
| correctly. | |
Loud noises are | This is not a fault. | |
heard during the | These noises occur when water is flushed through the | |
descaling | machine at a high pressure. | |
programme. |
| |
The | The coffee machine needs descaling. | |
time is getting | Descale the coffee machine (see "Descaling"). | |
longer, the |
| |
amount of water |
| |
being dispensed |
| |
is incorrect and |
| |
the coffee |
| |
machine is not |
| |
performing |
| |
properly. |
| |
|
|
65
