Problem solving guide
Message | Possible cause and remedy |
F73 or
"Check the brew unit"
The brew unit cannot be positioned correctly.
Switch the machine off with the On/Off sensor.
Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Push the coffee ejector of the brew unit into the correct position (see diagram).
Do not fit the brew unit. Close the front of the machine and switch the machine on with the On/Off sensor.
This will initialise the brew unit motor and put it back into the start position.
When "Insert the brew unit" appears in the display, open the front of the machine and put the brew unit back in the machine.
Then close the door.
61
