Cleaning and care
If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Problem solving guide").
After taking the brew unit out of the machine do not change the position of the brew unit handle, as this would cause the brew unit to be out of alignment and you will not be able to push it back into the coffee machine.
Clean the brew unit by hand under warm running water without using
Wipe any remaining coffee off the two filters (see arrows). One filter is located in the funnel and the other to the left of the funnel.
Dry the funnel to prevent ground coffee sticking to it the next time a coffee is prepared.
Clean the inside of the coffee machine. Use your vacuum cleaner to remove dry coffee grounds.
To replace the brew unit, repeat the previous steps in the reverse order:
Push the brew unit back into the coffee machine, making sure it goes in straight.
Press the button under the handle of the brew unit and, whilst doing so, turn the handle to the right .
Close the machine door.
54
