| Problem solving guide | |
|
| |
|
| |
Problem | Possible cause and remedy | |
|
| |
The sensors do | There is an internal fault. | |
not react to touch. | Disconnect the machine from the power supply by | |
The appliance | removing the plug from the socket. | |
cannot be |
| |
operated. |
| |
The coffee | The system lock has been activated. | |
machine does not | You need to deactivate the system lock (see "Settings - | |
switch itself on, | System lock"). | |
although the |
| |
The machine was not used after being switched on | ||
"Switch on at" | ||
setting has been | automatically three times in succession. | |
activated for the | Switch the machine on and dispense a drink. | |
timer. |
| |
The display is | The display brightness has been set too low. | |
hard to see or not | Change this setting (see "Settings - Display brightness"). | |
able to be read. |
| |
"Fill and replace | The water container is not in the correct position. | |
the water | Remove the water container and replace it. | |
container" |
| |
The water container was not correctly filled and replaced for | ||
appears in the | ||
display even | descaling. | |
though the water | Fill the water container to the descaling symbol and | |
container is full | restart the descaling programme. | |
and in the |
| |
machine. |
| |
"Fill and replace | The coffee machine needs descaling. | |
the water | Switch the machine off with the On/Off sensor. Wait | |
container" | approx. 1 hour. | |
appears after | Then switch the machine on again. As soon as | |
switching on even | ||
though the | phase" appears in the display, touch and select | |
"Descale the appliance". | ||
container is filled | ||
| ||
and fitted in the | Descale the coffee machine. | |
machine. |
| |
The appliance |
| |
does not rinse. |
| |
|
|
63
