Switching on and off
Switching on
Switch the master switch on the left hand side of the machine to the "I" position.
Touch the On/Off sensor .
The appliance will begin rinsing after the
If the coffee machine still has an operating temperature higher than 60 °C , then rinsing will not take place.
"Select type of drink" will appear in the display.
If you do not touch any sensors or run the maintenance programme, the display will switch itself off after approx. 7 minutes to save energy. The right hand LED will flash on and off as long as the machine is switched on.
Touch any one of the sensors to wake the machine up again to make a drink.
Switching off
Touch the On/Off sensor .
If the coffee machine has been used for making a drink it will rinse itself before switching off.
If a drink has been made using milk, the message "Place milk pipework in drip tray" will appear in the display.
Insert the end of the milk pipe into the aperture in the drip tray, then
Touch OK.
If the milk system is not rinsed out before switching off, it will have to be rinsed the next time the machine is switched on.
Switching off for longer periods of time
If the coffee machine is not going to be used for a longer period of time:
Empty the drip tray, the waste container and the water container.
Clean all parts thoroughly, including the brew unit.
Switch the machine off with the master switch and at the wall socket.
The time of day will not be saved. It will have to be reset next time the machine is switched on.
21