Setting the serving size
The coffee machine is equipped with portion programing. You can program the amount of water used for each portion of espresso, coffee or hot water to suit your taste and cup size.
For drinks prepared with milk, you can also set the duration of the steam used for heating or frothing the milk. You can also program the amount of hot milk and froth.
There is a maximum amount which can be programmed for each type of drink. Preparation stops when this is reached. The maximum portion size possible for that type of drink will then be saved.
There are two ways to program the portion amount; either:
–when preparing a drink, or
–if you call up PROG. THE AMOUNT in the SETTINGS menu.
If there is insufficient water in the water container, the process will be stopped. The portion size will not be saved.
TIP You can cancel programming the amount as long as CANCEL is visible in the display.
Setting the serving size when making a drink
Press the , , or button for at least 3 seconds to program the amount for that particular drink.
For caffè latte, milk froth, hot milk and hot water you can start portion size programming by pressing the
OK button for at least 3 seconds after selecting the drink
Setting portion size for espresso and coffee
^Place the desired cup under the main dispenser.
^Press and hold the or button until PROG. THE AMOUNT appears in the display.
The selected drink will be prepared and SAVE will appear in the display.
^Press the OK button when the cup has been filled to the level you want.
The portion size programmed will now be dispensed every time that particular drink is selected.
31
