Miele CM 5200 manual Important Safety Instructions, For machines with stainless steel trim

IMPORTANT SAFETY INSTRUCTIONS

~Fill the bean container only with roasted whole coffee beans. Do not fill the bean container with coffee beans which have been treated or with ground coffee.

~Do not reach into the grinder.

~Only put ground coffee or cleaning tablets to the ground coffee chute. The cleaning tablets remove grease from the brew unit of the coffee machine.

~Only use plain milk. Flavored milk products contain substances that can clog the milk system.

~Do not use coffee beans which have been treated with caramel, sugar, or fill the coffee machine with other sugar-containing liquids. Sugar damages the machine!

~Never place a cup with a burning alcohol-coffee mixture underneath the main dispenser. This could cause plastic parts of the coffee machine to catch fire and melt.

~Do not place any open flame, e.g. a candle, on or near the coffee machine. The coffee machine could catch fire and the fire could spread.

~Disconnect the coffee machine from the power supply before cleaning.

~Clean the coffee machine and the milk flask (depending on model) daily (for further information see "Cleaning and Care").

~Do not use a steam cleaner to clean this machine. The steam could cause a short circuit.

~Descale the coffee machine regularly with the appropriate number of Miele descaling tablets for the water hardness level in your area. Descale the machine more frequently in areas with very hard water. The manufacturer cannot be held liable for damage arising from insufficient descaling.

~Degrease the brew unit regularly with the supplied Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly.

~Used coffee grounds from the waste container should be disposed of with organic waste or put on the compost heap Coffee grounds can clog the sink.

For machines with stainless steel trim:

~Do not use sticky notes, transparent adhesive tape, masking tape or other types of adhesive on the surface of the trim. These damage the surface, causing it to lose its dirt repellent protective coating.

~The surface of the stainless steel trim is susceptible to scratching. Even magnets can cause scratches to appear.

SAVE THESE INSTRUCTIONS AND REVIEW THEM PERIODICALLY

7