Cleaning and care
^Carefully pull the brew unit out of the coffee machine.
If you cannot remove the brew unit easily, the brew unit is not in the correct position (see "Frequently asked questions").
After the brew unit has been removed, do not alter the position of the brew unit handle.
This would displace the brew unit and it would not fit back into the coffee machine.
^Clean the brew unit by hand under hot running water without soap.
^Wipe any coffee from the two filters. One filter is located in funnel a and the other to the left of funnel b.
^Dry funnel area a to prevent ground coffee sticking to it.
^Clean the inside of the coffee machine Use your vacuum cleaner to remove dry coffee grounds.
To replace the brew unit, repeat the previous steps in the reverse order:
^Push the brew unit back into the coffee machine, making sure it is straight.
^Press the button on the end of the handle of the brew unit a and while doing so turn the handle clockwise b.
^Close the door. Turn the flaps 90° counterclockwise. Lower the flaps.
55
