Miele DG 5080, DG 5070, DG 5088 Water hardness, Volume, Safety, Settings, Display

Settings

Water hardness

The steam oven is set at the factory to water hardness setting IV (Very hard 4). You can set the steam oven for the water hardness level in your area.

You can use the test strip supplied to check the water hardness level, or your local water supplier will be able to advise you on the water hardness of your area.

The water hardness is shown as settings I to IV equivalent to the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).

Hardness level	Hardness range	Setting
I	1-7 °dH	Soft 1
	(0.2-1.3 mmol/l)
II	8-14 °dH	Medium 2
	(1.4-2.5 mmol/l)
III	15-21 °dH	Hard 3
	(2.7-3.8 mmol/l)
IV	>21 °dH (above	Very hard 4
	3.8 mmol/l)

Display

The contrast and brightness can be adjusted.

Volume

The volume of the buzzer and also the keypad tone which sounds each time a sensor is touched can be altered. The keypad tone can also be switched off.

Safety

Once the setting under "System lock" has been changed to "Permitted", you will be able to activate the system lock to prevent the steam oven being switched on unintentionally, by children for example.

38