Before using for the first time
Programming and setting the water hardness level
Your water hardness level must be pro- grammed into the machine using the buttons on the control panel. The water hardness level selector in the wash cabinet is then also set to the water hardness level in your area.
Programming and changing the wa- ter hardness level
^Turn off the dishwasher with the “On/Off” button.
^Turn the program selector to “Stop”.
^Hold the “Start” button in and at the same time turn the dishwasher on with the “On/Off” button. Release the “Start” button within 2 seconds.
The “Salt” indicator flashes.
Note:
If any other indicator lights flash or light the process must be repeated.
Except:
If the “Rinse aid” indicator flashes or lights then rinse aid was never added or needs to be refilled.
^Turn the program selector to your corresponding water hardness level (see table below).
gr/gal | ppm | Selector | |||
|
|
|
|
| Settings |
|
|
|
|
|
|
1 | - | 4 | 20 | - 70 | Normal 55 °C/130 °F |
|
|
|
|
|
|
5 | - | 7 | 90 | - 130 | Sani Wash |
|
|
|
|
| |
8 | - 10 | 140 | - 180 | Normal 65 °C/150 °F | |
|
|
|
|
| |
11 | - 14 | 200 | - 250 | “4 o’clock” position | |
|
|
|
|
| |
15 | - 17 | 270 | - 310 | “5 o’clock” position | |
|
|
|
|
| |
18 | - 21 | 320 | - 380 | “6 o’clock” position | |
|
|
|
|
| |
22 | - 35 | 400 | - 630 | “7 o’clock” position | |
|
|
|
| ||
36 | - 70 | 650 - 1260 | “8 o’clock” position | ||
|
|
|
|
|
|
The water hardness selector is preset to 1 - 4 gr/gal (20 – 70 ppm).
Example:
For a water hardness level of 20 gr/gal.
Turn the program selector to the “6 o’clock” position.
14
