Solving problems
Increasing the water intake time
To increase the water intake time, pro- ceed as follows:
^Turn off the dishwasher using the “On/Off” button.
^Turn the program selector to “Stop”
^Press the “Start” button while simulta- neously turning on the machine with the “On/Off” button. Release the “Start” button within 2 seconds.
The
Note:
If other indicator lights are flashing, repeat the process.
Except:
If the rinse aid indicator lights the rinse aid was never added or needs to be re- filled. See “Adding rinse aid”.
^Turn the program selector to “Economy 55°C/130°F”.
–If the “Start” indicator does not light, the water intake time is set to normal.
–If the “Start” indicator lights the ex- tended water intake time is set.
^To change the setting, press the “Start” button.
The “Start” indicator will light or go out each time the button is pressed.
^Turn the program selector to “Stop”.
^Turn off the dishwasher with the “On/Off” button.
The modified intake time is now stored.
49
