Solving problems
Checking the water level
If the water pressure is less than 15 psi, not enough water will flow into the wash cabinet.
^To check the water level, open the
water valve completely and run the “Rinse & Hold” program once (with- out dishes), to bring water into the system.
^ Run, the “Rinse & Hold” program |
|
|
|
again. After approximately 3 minutes, |
|
|
|
open the door and remove the lower |
|
|
|
basket from the machine. | The water level is correct when dimen- | ||
| sions “X” is at least 1/8” (4 mm). | ||
| If it measures less, the water intake time | ||
| must be increased (see the following | ||
| page). | ||
48
