Problem solving

 

 

 

 

 

Problem

 

Possible cause

 

Remedy

 

 

There is a knocking

 

This may be from the in-

 

This has no affect on the

noise in the pipes.

 

stallation or the cross

 

dishwasher. If in doubt

 

 

section of piping.

 

contact a plumber.

Dishes and cutlery are

 

The rinse aid setting may

 

Increase the dosage or

not dry or are flecked.

 

not be high enough or the

 

refill the reservoir, see

 

 

rinse aid reservoir is

 

“Before using for the first

 

 

empty.

 

time”.

 

 

 

 

 

 

 

The water hardness level

 

Set the selector to a lower

 

 

selector in the wash cabi-

 

setting, see “Pro-

 

 

net is set too high.

 

gramming and setting the

 

 

 

 

water hardness level.”

 

 

 

 

 

 

 

Dishes were unloaded too

 

Leave dishes in for lon-

 

 

soon.

 

ger, see “Operating the

 

 

 

 

dishwasher”.

 

 

 

 

 

Dishes are not cleaned

 

The dishes were not

 

See “Loading the dish-

 

 

loaded correctly. Dishes

 

washer”.

 

 

were placed inside other

 

 

 

 

pieces, water could not

 

 

 

 

reach all surfaces.

 

 

 

 

 

 

 

 

 

The outlet of the water

 

Make sure that dishes

 

 

feed tube for the middle

 

loaded in the rear of the

 

 

spray arm was covered.

 

upper basket do not

 

 

Not enough water flowed

 

cover pipe outlet.

 

 

in to the middle arm.

 

 

 

 

 

 

 

 

 

The program was not

 

Select a more intensive

 

 

powerful enough.

 

program, see “Program

 

 

 

 

Chart”.

 

 

 

 

 

 

 

Not enough detergent

 

Use more detergent, see

 

 

was dispensed.

 

“Operating the dish-

 

 

 

 

washer“.

 

 

 

 

 

 

 

The spray arms are

 

Rearrange items so that

 

 

blocked.

 

spray arms can rotate

 

 

 

 

freely.

 

 

 

 

 

43

Page 43
Image 43
Miele G848 manual Problem solving, There is a knocking, noise in the pipes, Dishes and cutlery are, not dry or are flecked