The “End” and “Start”

Problem solving

Problem

Possible cause

Remedy

The “End” and “Start”

A service call may be

– Turn the program se-

indicators flash simulta-

needed.

lector to “Stop”.

neously.

 

– Turn off the dishwasher

 

 

using the “On/Off” but-

 

 

ton.

 

 

After a few seconds:

 

 

– Turn on the dishwasher

 

 

with the “On/Off” but-

 

 

ton.

 

 

– Turn the program se-

 

 

lector to desired pro-

 

 

gram.

 

 

– Press the “Start” but-

 

 

ton.

 

 

If the indicator lights flash

 

 

again:

 

 

– Call the Miele Techni-

 

 

cal Service Dept.

 

 

Despite the problem the

 

 

dishwasher can still be

 

 

used in all programs but,

 

 

the water will not heat.

 

 

 

Knocking noise in the

The spray arm is hitting

Interrupt the program and

wash cabinet

something in the basket.

rearrange items blocking

 

 

the spray arms.

Rattling from within the

The dishes are moving

Interrupt the program and

dishwasher

around inside the dish-

secure items inside.

 

washer.

 

A whistling noise is

The circulation pump seal

This is not a problem. Try

heard during the pro-

sometimes makes a whis-

other detergents. Contact

gram.

tling noise. This may be

the Miele Technical Ser-

 

caused by detergent.

vice Department if the

 

 

noise persistent.

 

 

 

42

Page 42
Image 42
Miele G848 Problem solving, The “End” and “Start”, indicators flash simulta, neously, Knocking noise in the, wash cabinet