Before using for the first time
Checking the programmed water hardness
^Turn off the dishwasher with the “On/Off” button.
^Turn the program selector to “Stop”.
^Hold the “Start” button in and at the same time turn the dishwasher on with the “On/Off” button. With in
2 seconds release the “Start” button.
The “Salt” indicator flashes.
Note:
If any other indicators light or flash the process must be repeated.
Except:
If the “Rinse aid” indicator lights rinse aid was never added or needs to be re- filled.
^Turn the program selector slowly past “Normal 55 °C/130 °F” to the “8 o’clock” position.
The “Start” indicator will light when the programmed water hardness setting is reached. The water hardness level cor- responds to the position of the program selector (see the table “Programming and setting the water hardness level”).
^Turn the program selector to “Stop”.
^Turn off the dishwasher with the “On/Off” button.
16
