Problem solving
Problem | Possible cause | Remedy |
Dishes are not clean | The spray arm jets are | Clean the spray arms, |
| blocked. | see “Cleaning and care”. |
| The filter combination in | Clean and/or reseat the |
| the base of the wash cab- | filter combination cor- |
| inet is not clean or is not | rectly. |
| seated correctly. | Clean the spray arms, |
| This may cause the spray | see “Cleaning and care”. |
| arms to be blocked. |
|
| The drain pump and | Clean the drain pump |
| and the | |
| blocked. | see “Cleaning and care”. |
|
|
|
| Not enough water comes | Check the water level and |
| into wash cabinet. | the water intake time. |
|
|
|
Tea or lipstick stains | The wash temperature of | Select a program with a |
were not completely re- | the selected program was | higher temperature. |
moved | too low. |
|
|
| |
|
|
|
| The bleaching effect of | Use detergent containing |
| the detergent used was | chlorine. |
| too low. |
|
|
|
|
White residue is visible | Not enough rinse aid was | Increase the rinse aid set- |
on cutlery and dishes, | used. | ting, see “Before using for |
clouding occurs on |
| the first time”. |
glassware, film can be | The salt reservoir is | Add reactivation salt, see |
wiped off. | empty. | “Before using for the first |
|
| time”. |
|
|
|
| The salt cap was not | Reseat the salt cap and |
| screwed on correctly. | make sure it is screwed |
|
| back on correctly. |
|
|
|
44