Electrical connection
Installation work and repairs should only be performed by a qualified technician in accordance with all ap- plicable codes and standards. Re- pairs and other work by unqualified persons could be dangerous and the manufacturer will not be held re- sponsible.
Before connecting the appliance to the power supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent machine damage. Consult a quali- fied electrician if in doubt.
CAUTION: Before servicing, discon- nect the power supply by either re- moving the fuse, unplugging the unit or manually "tripping" the circuit breaker.
Installer:
Please leave these instructions with the consumer.
Power supply
The oven is equipped with a 6 ft./1.8 m flexible power cord consisting of 4 wires ready for connection to a dedi- cated 3 pole, 4 wire grounding power supply:
–120/240 V, 60 Hz, 20 A
or
–120/208 V, 60 Hz, 20 A
Black wire: connect to L1 (hot), 20 A
Red wire: connect to L2 (hot), 20 A
White wire: connect to N (neutral)
Green wire: connect to GND (ground)
A dedicated line and junction box should be used to connect the oven to a 20 A circuit.
Connection details are also given on the diagram located on the top of the oven.
61
