Changing the door hinging
^Unscrew upper hinge pin k using a suitable spanner.
^Using a
^Screw in upper hinge pin k on the opposite side using a suitable spanner.
^Refit covers l from the back on the opposite side, and then click them into place at the front.
^Remove caps m from the door bearing bush in the door and refit on the opposite side.
^Using a screwdriver, remove spring clamp n from underneath the door and fit it on the opposite side.
^Pull hinge pin e with washer o out of the door bearing bush from below.
Important. The opening on washer o must be placed over the tab on hinge pin e so that washer o sits correctly on hinge pin e.
^Place hinge pin e with washer o in the door bearing bush on the opposite side. Important. The tab on the pin must face the inside of the door and the notch the outside.
40
