Loading the dishwasher
Load the dishes so that water can contact all surfaces.
Do not place dishes and cutlery in- side other pieces where they may be concealed.
Hollow items such as cups and glasses should be inverted and placed in the upper basket.
Concave based items should be placed at an angle on top of the cof- fee bar, (see page 21),so that water can run off them freely.
Tall, narrow, hollow pieces should be placed in the center of the basket, rather than in the corners, to ensure water coverage.
Small cups and glasses should be placed on the cup racks. Taller mugs and glasses can be placed under- neath the rack.
Do not cover the funnel in the middle of the upper basket.
The spray arms must not be blocked by items which are too tall or hang through the baskets. If in doubt, test for free movement by manually rotat- ing the spray arms.
Some food items may contain natural dyes that can discolor plastic items in the dishwasher ( e.g. carrots, to- matoes, ketchup, etc.). The stability of plastic items is not affected by this discoloration.
Some loading examples are shown on the following pages.
Note
If the additional feature “Top Solo” has been selected with a wash program, all items must be loaded into the upper basket and cutlery tray. See the “Addi- tional features” section for further infor- mation.
In areas where the water has high mineral content, it may be necess- ary to polish silverware after wash- ing to achive a high shine.
18
