Problem solving guide
The dishes are not clean.
–The dishes are incorrectly loaded.
–The correct amount of detergent was not used - see “Program chart”.
–The filters in the wash cabinet are not clean, or the spray arm jets are blocked - see “Cleaning and care”.
–The wrong program was selected – see “Program chart”.
White residue is visible on cutlery and dishware.
–No salt in the salt reservoir.
–Salt reservoir lid has not been screwed on properly.
–Not enough rinse aid was used.
Water remains in the dishwasher at the end of a program.
–The drain hose is kinked or clogged.
–The drain pump or
The “Water Intake” indicator lights during the “ENERGY SAVER” pro- gram.
The “ENERGY SAVER” program re- quires a water supply temperature of at least 45 °C/115 °F. If the incoming water is less than this temperature, the “Water Intake” lamp illuminates (see also “Program selection”). If your hot water system has been used recently, not enough hot water may have been available to adequately clean the dishes.
If necessary, repeat the program.
If the “Water Intake” lamp lights again, select a different program.
40
