Miele M.-NR. 04 390 922 operating instructions Program chart

Program chart

Program	When to use		Detergent
		A1)		B2)
		Compart-	Compart-	Compart-
		ment	ment	ment
		I	II	II
		(Pre-wash)	(Main	(Main
			wash)	wash)
	Universal Programs
NORMAL	This program is for normal everyday loads.	20 %	80%	100 %
55 °C/130 °F
NORMAL	Same as NORMAL 55 °C/130 °F, but at a	20 %	80 %	100 %
65 °C/150 °F	higher temperature for stubborn dried on
	particles.
INTENSIVE	Same as NORMAL 55 °C/130 °F, but with a	20 %	80 %	100 %
55 °C/130 °F	preliminary pre-wash for heavy soiling.
INTENSIVE	Same as INTENSIVE 55 °C/130 °F, but at a	20 %	80 %	100 %
65 °C/150 °F	higher wash temperature for stubborn dried
	on particles and lightly soiled pots and pans.
	Special programs
ENERGY SAVER	Only select ENERGY SAVER if the dish-	20 %	80 %	100 %
	washer is connected to a hot water supply
	(minimum temperature 45 °C/115 °F).
	– see chapter "Choosing a program"
POTS & PANS	For pots, pans and dishware with dried on	20 %	100 %	120 %
75 °C/170 °F	particles of food and very heavy soiling.
ECONOMY	For half a, normal everyday load, or:		50 %3)	50 %3)
55 °C/130 °F	for full loads with very light soiling (e.g.
	coffee cups).
CHINA & CRYSTAL	“Gentle program”, for lightly soiled and		50 %3)	50 %3)
45 °C/115 °F	heat sensitive tableware.
SHORT	“Quick program”, for lightly soiled		50 %3)	50 %3)
45 °C/115 °F	dishware (e.g. party dishware).
RINSE & HOLD	For rinsing dishes when a complete cycle
	is not needed.

The dispensing method will depend on the type of detergent being used:

A 1)	Use this method for:
	– detergents which contain phosphates and chlorine.
	Divide the total amount, as shown, between compartment I and compartment II.
B 2)	Use this method for:

–detergent which is chlorine and phosphate free.

–detergent which is chlorine free but contains phosphates. In this instance the whole amount is placed in compartment II.

3)Use half of the manufacturers recommended amount of detergent.

26