Cleaning and care
Cleaning the water inlet filter.
The water valve housing on the inlet hose contains electrical compo- nents and should not be immersed, or run through water.
A filter is incorporated in the inlet hose that is attached to the dishwasher’s main shutoff valve. If your water supply is hard, or the pipes contain sediment; this filter may clog and prevent suffi- cient water from entering the wash cabinet. It can be cleaned as follows:
Cleaning the filter.
Disconnect the dishwasher from the electrical supply (unplug it or shut off the circuit breaker).
Turn off the main shutoff valve and unscrew the inlet hose.
Carefully remove the rubber seal.
Remove the filter using needle nose pliers and clean it by rinsing under running water.
Replace the filter and seal. Make sure they are seated correctly.
Screw the inlet hose back onto the water valve, making certain it is not
Slowly turn on the valve and test for leaks.
37
