Cleaning and care
Cleaning the spray arms.
On rare occasions particles of food may get stuck in the spray arm jets. They can be easily cleaned as follows:
Remove the lower basket and the cutlery tray (if so equipped). The cut- lery tray frame can be pushed back in.
Unscrew and remove the upper spray arm.
To remove the middle spray arm lo- cated beneath the upper basket, gently push upwards until it engages in the ratchet b, then unscrew it c.
Lift up on the lower spray arm to remove it.
To clean the spray arms, use a pointed object to push the the food particles into the jets.
Rinse under running water to com- plete the process.
After cleaning, replace the spray arms.
Important:
After replacing the spray arms, check that they rotate freely.
35
