Electrical connection
It is the responsibility and obligation of the customer to ensure that the electrical and plumbing installation is carried out by a qualified installer in compliance with national and local codes and ordinances.
Disconnect the appliance from the power supply before servicing the ma- chine by pulling the plug or turning off the circuit breaker.
Specifications.
Power Supply: 120 VAC, 60 Hz
Rated Load: 12.5 A / 1500 W
Circuit breaker:15 AMPS
The unit is equipped with a 5 ft (1.5 m) power supply cord for connection to a 120 V, 15 AMP grounded receptacle.
Using an outlet:
It is recommended that the power outlet for the appliance be installed in a cabinet or on a wall adjacent to the undercounter space in which the appliance itself will be located. An opening through the partition be- tween the compartments of 1" to
1 1/2" (3 to 4 cm) can be made to allow the plug to pass through.
Make certain that there are no rough edges that could damage the power cord. If metal cabinets are used, place the supplied rubber grommet around the edge of the opening be- fore passing the cable through.
Exercise care when pulling the dish- washer in or out, so as not to dam- age the power cord or hoses.
GROUNDING INSTRUCTIONS.
THIS APPLIANCE MUST BE
PROPERLY GROUNDED.
In the event of a malfunction, ground- ing reduces the risk of electric shock by providing a path of least resistance for the electric current. This appliance is equipped with a cord that has a grounding conductor and plug. The plug must be connected to an appropri- ate outlet that has been installed and grounded in accordance with all local and national codes and regulations.
DANGER - Improper installation of the electrical outlet or im- proper grounding can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the ap- pliance is properly grounded. Do not modify the plug provided with the appliance. If it will not fit the outlet, have the correct outlet in- stalled by a qualified electrician.
54
