Miele M 8261 manual Electrical connection AUS, NZ, This Appliance Must Be Earthed

Models: M 8261

1 60
Download 60 pages 37.82 Kb
Page 53
Image 53
Electrical connection AUS, NZ

Electrical connection AUS, NZ

Before connecting the appliance, ensure that it has not been damaged in any way. Do not use a damaged appliance.

All electrical work should be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations.

The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply.

The voltage and connected load are given on the data plate which is located inside the door to the appliance. Please ensure that these match the household mains supply.

Connection should be made via a suitable switched socket, or via a suitable isolator, which complies with national and local safety regulations, and the on/off switch should be easily accessible after the appliance has been installed. If it is installed via an isolator switch, connection must be carried out by an electrician.

For extra safety it is advisable to install a residual current device with a trip current of 30 mA.

WARNING

THIS APPLIANCE MUST BE

EARTHED

If the connection cable is damaged it must be replaced by a Miele approved Service Technician only.

53

Page 53
Image 53
Miele M 8261 manual Electrical connection AUS, NZ, This Appliance Must Be Earthed