Installation
When building in the appliance, ensure that the vent outlets at the front of the appliance are not hindered, and that there is adequate ventilation to the rear of the housing unit by leaving a large enough gap (see diagram: 50 mm x unit width). Do not block the ventilation gaps with any objects.
The appliance is designed to be built into a tall unit.
A minimum installation height of 850 mm must be maintained.
To transport the appliance, make sure that you lift it by the appliance housing and not by the frame. The frame is not sturdy enough to bear the weight of the appliance when it is being carried.
Building-in dimensions
| 452,5 |
| 3 |
>850 | 20 |
|
Building-in kit
The following items are supplied in the accessory pack for installing the appliance:
4 x 16mm
3
Installation
The appliance must be built in before it can be used. Otherwise it poses an electric shock hazard.
54