Changing the programme sequence
Once a programme has started
- changing the programme
You cannot change to another programme once a programme has started (this prevents unintentional alterations).
If an attempt is made to change a selection, Option not possible will appear in the display.
It is still possible to select or deselect the Buzzer and the
You will need to cancel the current programme before you can select a new one.
-cancelling the programme and then selecting a different programme
^Press the Start/Stop button.
The "Stopped" option Cancel programme will appear in the display.
^Confirm by pressing the right hand Menu button under OK.
The items will be cooled down, depending on the temperature reached and how long they have been dried for.
If you press the Start/Stop button during the cooling down phase and confirm by pressing the right hand Menu button under OK, Finished will appear in the display.
^Switch the dryer off.
^Switch the dryer on.
^Select another programme and start it.
-cancelling the programme and then removing the laundry
^Proceed as described in "Adding or removing laundry after a programme has started" below.
^Switch the dryer off after closing the door.
Adding or removing laundry after a programme has started
^Press the Door button.
^Open the door.
,Danger of burning:
Do not touch the back of the drum when adding or removing items. The drum and the items can get very hot.
^Add or remove items as required.
^Close the door.
^Press the Start/Stop button.
Time remaining
The time left shown in the display may now vary from the actual drying time.
25
