Installation site | Miele T 4839 Ci instruction

Installation

Installation site

,Make sure the dryer door can be opened without hindrance after installation.

Building under a continous worktop / in a kitchen run

This tumble dryer is specially designed for installation under a continuous worktop run in a fitted kitchen.

N= Niche height (820-930 mm)

It is supplied fitted with a cover plate instead of an appliance lid. The cover plate is necessary to ensure electrical safety and must not be removed.

When moving the dryer do not hold it by the door.

–The slides (available to order) should be used to protect the floor from damage when the dryer is pushed into position or taken out for servicing.

–The electrical socket must be located in an accessible position near the machine.

Please note:

Niche height	Accessory
820 mm	None required
from 830-840 mm	Fit longer screw feet* (set to
	approx. 40 mm)

from 870-885 mm	Use one raising kit*
from 915-930 mm	Use two raising kits*

*optional accessory

The dryer must not be used without the front panel in place.

If the kitchen run has a continuous furniture plinth in place, a gap must be made for the tumble dryer.

41

Image 41

Miele T 4839 Ci operating instructions Installation site, Building under a continous worktop / in a kitchen run

Contents

Operating instructions For condenser tumble dryer T 4839 Ci Disposal of the packing material Caring for the environmentDisposal of your old appliance Energy saving tips Contents Contents Consumption data Technical data Correct application Safety with children Technical safety Correct use Accessories Control panel Operating the tumble dryer Selecting programmes via the display Selecting and displaying settingsDisplay Programme duration / Estimated time remaining Menu buttons Setting the language Before using for the first timeSetting the time of day Entry menu Tips on drying Care symbols Brief instructions How to dry correctlySort the laundry Turn on the tumble dryer Further programmes Select a programme Remove the laundry when the programme has finished Select any Extra options / Delay startStart the programme Before the end of a programme Extra options Low temperatureShort Anti-crease To select delay start Delay startTo begin delay start To alter delay start Programme chart Normal+, Normal, Hand iron r, Hand iron rr, Machine iron DelicatesWoollens handcare Automatic Cool air DenimWarm air Standard pillows Normal drying level Sportswear Silks handcareOuterwear Proofing Normal drying level Cottons hygiene Normal drying level Hygiene programmesMinimum iron hygiene Normal drying level Timed drying hygiene Once a programme has started Changing the programme sequenceAdding or removing laundry after a programme has started Time remaining Emptying the condensed water container Cleaning and care Cleaning them whilst dry Cleaning the fluff filters Cleaning them with water Cleaning the tumble dryer Removing the condenser unit Cleaning the condenser unit Checking the condenser unit Replacing the condenser unit Fault messages in the display Problem solving guide Appears after Is cancelled,Programme has Finished Other problems Been cleaned Problem Possible cause Remedy Water leaks fromMachine after Condenser unit has Indicator light flashes Problem Possible cause Remedy Programme doesWhen a programme is Not start Changing the lamp Future updates PC After Sales serviceAppliance guarantee Optional accessories Front view Installation Building under a continous worktop / in a kitchen run Installation site Washer-dryer stack Before moving the tumble dryer again e.g. when moving houseAligning the appliance Removing the spacer bars Fitting the front panel Front panel dimensionsFitting the front panel With spacer bars Without spacer bars Fitting a door front panel made by another manufacturerPreparing the front panel Preparing the fixing points Fitting a plinth facing Plinth facing dimensionsInstallation Arranging the drain hose External condensed water outletGeneral notes External drainage via a sink or gully Installation conditions requiring a non-return valve Fit adapter 1 to the sink drain outlet Electrical connection U.K Non-rewireable plugs BSElectrical connection Large pillows Consumption data Technical data Settings menu J for changing default settings To open the Settings menu Settings menu JTo close the Settings menu Language J Drying levels Time of dayExtended cool down To set the clock format To enter the lock code Airways indicatorTo activate the lock code To deactivate the lock code To use the dryer when the lock code is activated Contrast Brightness Keypad toneStandby display Memory Alteration rights reserved/2008