Milan Technology MIL-SM801XX manual Assigning an IP Address to the switch, MIL ip-address MIL 2

Note: Console program is case sensitive.

After you have finished setting parameters, press the “Enter” Key and the Main Menu of console management appears.

Figure 3-3. The Main Menu of Console Management

Assigning an IP Address to the switch

Once you have logged into the MIL-SM801XX, you need to assign an IP address to the switch’s Ethernet interface so that you can connect to the switch using a Web Browser.

1.From the Main Menu of the console, select Item 1 by typing in “1” after the prompt and press Enter. You must select the appropriate Boot Method ---

Flash, BOOTP, or DHCP (For more information, see Web-based Management

– Agent Config ).

2.There are three command options to change the IP Address (the initial Default IP address is 192.168.1.77). For example, if you wanted to change the IP address to 199.86.12.40, you could type one of the following at the MIL prompt:

MIL> ip-address 199.86.12.40

MIL> 2 199.86.12.40

MIL> ip 199.86.12.40

Note: After typing in the command press Enter twice.

10